Eco-friendly Dielectric Coating for Wind Turbines Generator

Eco-friendly Dielectric Coating for Wind Turbines Generator

Fluorocarbon Cooling medium, it has good electrical insulation, and a high breakdown voltage, greater than 55KV.

this series are unique Perfluorinated liquid , which have high dielectric constant, 1.62g/ml density

,The fluoride solution can be widely used in cooling system of heating parts inside the wind generator

The characteristic of the Refrigerant For Wind Turbines Generator:

* Good electrical insulation, extremely high breakdown voltage above 40KV;

* Ideal chemical inertia and can be widely used in various temperature-controlled heat dissipation occasions;

* The low boiling point is a very moderate one. There is evaporation in the course of work, which take heat away through the heat of evaporation, thus ensuring the heating parts can work well and stably;

* Refrigerant For Wind Turbines Generator is non-dangerous goods, non-flammable and non-explosive, no fire point and flash point;

* The dielectric constant below 2 doesn`t make data lost in data center applications ;

* Good fluidity, lower viscosity than clear water; Can flow well and dissipate heat in the temperature control system;

* Fluoride Solution is Nontoxic, harmless, non-irritating;

* Environmentally friendly, have ODP value of 0 and extremely low GWP value

The physicochemical parameter of the Fluorocarbon Refrigerant:

Parameter	TUWF-47	TUWF-110	TUWF-160
dielectric constant	1.89	1.96	3.82
dielectric strength	55KV	52KV	40KV
surface tension	12.2mN/m	12.7mN/m	1.154mN/m
boiling point	47°C	110°©C	165°C
density	1.62g/ml	1.83g/ml	1.63g/ml
saturated water content	40ppm	50ppm	160ppm
critical temperature	205°C	--	--
PH value	7	7	7
flash point	No	No	No
fire point	No	No	No
ODP	0	0	0
GWP	7	low	low
specific heat	1.26 J/g°C	1.41J/g°C	1.35 J/g°C
heat of vaporization	121.7 J/g°C	136J/g°C	--
viscosity	0.55 mPa.s	0.87 mPa.s	1.24mPa.S
inhalation toxicity	low toxicity	low toxicity	low toxicity

Fluorocarbon Cooling Medium use:

This series of products are not only widely used in a variety of temperature-controlled heat

dissipation system, especially suitable for every link of the semiconductor manufacturing; but

also extensively applied to the immersion cooling for computer server system and other cooling

and heat dissipation, such as wind–driven generator and the inside the generator set, the

immersion cooling medium for high-voltage transformer, the cooling system for electric vehicle

battery and Phased Array Radar etc.

Product packaging:

This series of products are packed with 25kg/barrel, or for customer customization.

Product Storage and transportation:

This series of products are easily store and transport.

Contact us if you need more details on Wind Turbines Generator Dielectric Coating. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Coating for Wind Turbines Generator、Eco-friendly Dielectric Coating. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Fluorocarbon Refrigerant > Refrigerant For Wind Turbines Generator